Search Results | Clear Search | Previous (in doc) | Next (in doc) | Prev Doc | Next Doc

"Point in Time" Regulation Content

Commercial Transport Act

Commercial Transport Regulations

B.C. Reg. 30/78

NOTE: Links below go to reg content as it was prior to the changes made on the effective date. (PIT covers changes made from September 19, 2009 to present)
SECTIONEFFECTIVE DATE
Section 1.01 November 26, 2010
Section 6.02 March 31, 2010
Section 6.04 March 31, 2010
Section 7.07 November 26, 2010
July 21, 2011
Section 7.08 July 28, 2016
Section 7.20 November 26, 2010
Section 7.23 November 26, 2010
July 21, 2011
Section 7.25 November 26, 2010
Section 7.26 November 26, 2010
Appendix A July 21, 2011
Appendix B November 26, 2010
July 21, 2011
Appendix C July 21, 2011
Appendix D November 26, 2010
July 21, 2011
Appendix E November 26, 2010
July 21, 2011
Appendix F November 26, 2010
July 21, 2011
Appendix G November 26, 2010
July 21, 2011
July 28, 2016
Appendix H July 21, 2011
Appendix I November 26, 2010
July 21, 2011
Section 8.02 July 21, 2011
Section 8.04 July 21, 2011

 Section 1.01 definition of "axle width" BEFORE repealed by BC Reg 337/2010 effective November 26, 2010.

"axle width" means the overall width of an axle across the outside edges of the tires;

 Section 1.01 definition of "axle track width" was added by BC Reg 337/2010 effective November 26, 2010.

 Section 6.02 (2) (b.1) BEFORE repealed by BC Reg 206/2009 effective March 31, 2010.

(b.1) during the period beginning on January 1, 2010 and ending on March 31, 2010, intrajurisdictional movement of a commercial vehicle with a licensed gross vehicle weight of 11 794 kg or more;

 Section 6.04 (3) BEFORE repealed by BC Reg 206/2009 effective March 31, 2010.

(3)  In the case of a permit issued for the purpose referred to in section 6.02 (2) (b.1), the 3 month period begins on January 1, 2010 and ends on March 31, 2010.

 Section 7.07(1)(a), (c) and (d) BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

(a) if the semi-trailer, pony trailer or full trailer was manufactured after August 31, 1988 and before January 1, 1994 and is not equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is

(c) if the semi-trailer, pony trailer or full trailer was manufactured before January 1, 2008 and is equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is not less than 2.3 m and not more than 2.6 m, and

(d) if the semi-trailer, pony trailer or full trailer was manufactured after December 31, 2007 and is equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is not less than 2.5 m and not more than 2.6 m.

 Section 7.07 (4) was added by BC Reg 127/2011 effective July 21, 2011.

 Section 7.07 (1) (b) to (d) BEFORE amended by BC Reg 156/2011 effective September 9, 2011.

(b) if the semi-trailer, pony trailer or full trailer was manufactured after December 31, 1993 and is not equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is not less than 2.5 m and not more than 2.6 m,

(c) if the semi-trailer, pony trailer or full trailer was manufactured before January 1, 2010 and is equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is not less than 2.3 m and not more than 2.6 m, and

(d) if the semi-trailer, pony trailer or full trailer was manufactured after December 31, 2009 and is equipped with super single tires, the distance across the outside of the tires on each single axle, each tandem axle and each tridem axle is not less than 2.5 m and not more than 2.6 m.

 Section 7.07(2)(e) BEFORE amended by BC Reg 205/2016 effective July 28, 2016.

(e) an aerodynamic device installed at the rear of the truck, trailer or semi-trailer if

(i) any portion of the device more than 1.9 m above the ground does not protrude more than 0.61 m beyond the rear of the vehicle,

(ii) any portion of the device within 1.9 m of the ground does not protrude more than 0.305 m beyond the rear of the vehicle, and

(iii) the aerodynamic device is not designed or used to carry cargo.

 Section 7.20(b) BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

(b) a combination of vehicles with a gross vehicle weight in excess of 38 000 kg unless the towing vehicle has a tandem drive axle.

 Section 7.23(3)(i) BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

(i) the axle width dimension for the tridem drive axles

 Section 7.23 (3) (i) BEFORE repealed by BC Reg 127/2011 effective July 21, 2011.

(i) the axle track width dimension for the tridem drive axles

(i)  is a minimum 2.5 m and a maximum 2.6 m if the tridem tractor is manufactured after July 31, 1997, or

(ii)  is a minimum 2.4 m and a maximum 2.6 m if the tridem tractor is manufactured, or converted from a motor vehicle which was manufactured, before August 1, 1997.

 Section 7.25(b) BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

(b) the axles on which the super single tires are installed

 Section 7.26(1) BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

(1)  Subject to subsection (2), a person may drive or operate on a highway a logging truck that exceeds the gross weights referred to in this Division, including those referred to in the Appendices, if the amount of excessive gross weight does not exceed the following amounts:

 Section 7.26(1.1) was added by BC Reg 337/2010 effective November 26, 2010.

 Appendix A BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix A

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix B BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix B

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix B BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix B

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 7.]

 Appendix C BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix C

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix D BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix D

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix D BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix D

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 8.]

 Appendix E BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix E

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix E BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix E

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 8.]

 Appendix F BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix F

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix F BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix F

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 7.]

 Appendix G BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix G

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix G BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix G

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 8.]

 Appendix G BEFORE re-enacted by BC Reg 205/2016 effective July 28, 2016.

Appendix G

[en. B.C. Reg. 127/2011, s. 3.]

 Appendix H BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix H

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix I BEFORE amended by BC Reg 337/2010 effective November 26, 2010.

Appendix I

[en. B.C. Reg. 95/2006, s. 4.]

 Appendix I BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

Appendix I

[en. B.C. Reg. 95/2006, s. 4; am. B.C. Reg. 337/2010, Sch. 1, s. 9.]

 Section 8.02 BEFORE re-enacted by BC Reg 127/2011 effective July 21, 2011.

 Gross weight

8.02  Pilot cars shall be private passenger motor vehicles or single commercial vehicles of a gross weight not exceeding 5 500 kg.

[en. B.C. Reg. 76/92, s. 13; am. B.C. Reg. 476/94, s (c).]

 Section 8.04 (2) (a), (b) (i), (4) (a) and table 3, note 4 BEFORE amended by BC Reg 127/2011 effective July 21, 2011.

(a) have a box that

(i)  is 180 cm x 35 cm x 10 cm,

(ii)  has an outside surface covered with baked enamel,

(iii)  has an inside surface of white baked enamel that gives good reflective quality,

(iv)  has 8 lamps mounted in it and spaced so as to give even lighting of the sign background, and

(v)  shelters all wire connectors, switches, flashers and similar wiring components for the lighting attached to it, and

(i)  in the case of a "Wide Load", "Long Load" or "Oversize Load" sign, has a yellow background and black lettering of 28 cm in height and 4 cm stroke, and

(a) have mounted on it 2 amber lamps (one at each end) that

(i)  have a two-way light design,

(ii)  are at least 17.75 cm in diameter,

(iii)  meet C.S.A. Standard D-106.1 1972, and

(iv)  flash at 60-90 flashes per minute, or

4.The letter "D" shall be 20 cm in height and have a nominal 3 cm stroke.